Male Threaded Compression Fittings for TFE Hose

03-3/8-SXLMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £8.21 (£9.85 inc. VAT @ 20%)

Non swivel re-usable compression fitting, for direct connection into brake calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.5" thread length

Comparable to other manufacturer part numbers - 441-03P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

03-3/8-SXMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £8.21 (£9.85 inc. VAT @ 20%)

Non swivel re-usable compression fitting, for direct connection into brake calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.37" thread length

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

03-3/8-SFMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £7.38 (£8.86 inc. VAT @ 20%)

Dash 3 hose to 3/8" UNF. Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on bottom of port - use...

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-3/8-SVMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £7.17 (£8.60 inc. VAT @ 20%)

Dash 3 hose to 3/8" UNF Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. CONCAVE seat on bottom of port. 0.37"...

Comparable to other manufacturer part numbers - 440-03P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-M10x1-SFMP - -3 hose to M10 x1 straight male connector - zinc plated steel

From £7.06 (£8.47 inc. VAT @ 20%)

Dash 3 to M10 (x1.0 fine thread) Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on the bottom of port...

Comparable to other manufacturer part numbers - 448-31P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-M10x1-SVMP - -3 hose to M10 x1 straight male connector - zinc plated steel

From £8.02 (£9.62 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONCAVE seat on bottom of port. 0.37" thread length.

Comparable to other manufacturer part numbers - 442-31P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-M10x1-SVMSS - -3 hose to M10 x1 straight male connector - stainless steel

From £12.81 (£15.37 inc. VAT @ 20%)

Non swivel stainless steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONCAVE seat on bottom of port.

Comparable to other manufacturer part numbers - 442-31C

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

03-M10x1-SXLMP - -3 hose to M10 x1 straight male connector - zinc plated steel

From £7.97 (£9.56 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.50" thread length

Comparable to other manufacturer part numbers - 445-32LP

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-M10x1.25-SFMP - -3 hose to M10 x1.25 straight male connector - zinc plated steel

From £15.64 (£18.77 inc. VAT @ 20%)

Dash 3 hose to M10 x1.25 male. Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on bottom of port - use...

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

04-7/16-SXMP - -4 hose to 7/16" UNF straight male connector - zinc plated steel

From £11.99 (£14.39 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat on bottom of port.

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

03-M10x1.25-SVMP - -3 hose to M10 x1.25 straight male connector - zinc plated steel

From £7.28 (£8.74 inc. VAT @ 20%)

Dash 3 (JIC) hose to M10 (x1.25) non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. CONCAVE seat on the bottom of...

Comparable to other manufacturer part numbers - 442-32P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-M10x1.25-SXMP - -3 hose to M10 x1.25 straight male connector - zinc plated steel

From £8.85 (£10.62 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.37" thread length.

Comparable to other manufacturer part numbers - 445-32P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

04-7/16-SFMP - -4 hose to 7/16" UNF straight male connector - zinc plated steel

From £14.49 (£17.39 inc. VAT @ 20%)

Dash 4 hose to 7/16" UNF male. Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. FLAT seat on the bottom of port...

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

04-M12x1-SFMP - -4 hose to M12x1 straight male connector - zinc plated steel

From £13.87 (£16.64 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on bottom of port - use copper washer under hexagon.

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-1/8N-SFMP - -3 hose to 1/8" NPTF straight male connector - zinc plated steel

From £10.25 (£12.30 inc. VAT @ 20%)

Dash 3 hose to 1/8" male connector, Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders.

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-1/8B-SFMP - -3 hose to 1/8" BSP straight male connector - zinc plated steel

From £9.39 (£11.27 inc. VAT @ 20%)

Dash 3 Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection to callipers, master and wheel cylinders.

Comparable to other manufacturer part numbers - 323-03P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

03-3/8-SXBMP - -3 hose to 3/8" UNF straight male BULKHEAD connector - zinc plated steel

From £8.17 (£9.80 inc. VAT @ 20%)

Dash3 (–3 JIC) to 3/8" UNF Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. A range of locknuts and...

Comparable to other manufacturer part numbers - 443-03P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-3/8-SXBMSS - -3 hose to 3/8" UNF straight male BULKHEAD connector - stainless steel

From £12.43 (£14.92 inc. VAT @ 20%)

Non swivel stainless steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. A range of locknuts and washers are available for these fittings

Comparable to other manufacturer part numbers - 443-03C

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

03-M10x1-SXBMP - -3 hose to M10 x1 straight male BULKHEAD connector - zinc plated steel

From £7.79 (£9.35 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat. A range of locknuts and washers are available for...

Comparable to other manufacturer part numbers - 446-31P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

Photograph for illustrative purposes only - not actual product shown

03-M10x1-SXBMSS - -3 hose to M10 x1 straight male BULKHEAD connector - stainless steel

From £12.52 (£15.02 inc. VAT @ 20%)

Non swivel stainless steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. A range of locknuts and washers are available for these fittings

Comparable to other manufacturer part numbers - 446-31C

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

04-7/16-SXBMP - -4 hose to 7/16" UNF straight male BULKHEAD connector - zinc plated steel

From £14.54 (£17.45 inc. VAT @ 20%)

Dash 4 (–4 JIC) to 7/16" UNF. Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. A range of locknuts and...

Comparable to other manufacturer part numbers - 443-04P

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering

04-M12x1-SXBMP - -4 hose to M12 x1 straight male BULKHEAD connector - zinc plated steel

From £16.66 (£19.99 inc. VAT @ 20%)

Dash4 (–4 JIC) to M12 (x1.0 fine thread) Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. A range of...

Comparable to other manufacturer part numbers - 446-04-M121

Stafford Vehicle Components - Brake System Components - Re-Useable Clutch & Brake Fittings - Male Threaded Compression Fittings for TFE Hose

Wishlist Details & Ordering