Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Low pressure switch that 'makes' when pressure falls below a chosen point. Adjustable within a range of 1.45-14.5psi. With a 1/8NPTF thread to screw into a matching thread on a T piece or tapping...
Low pressure switch that 'makes' when pressure falls below a chosen point. Adjustable within a range of 15 to 120psi - set to 20psi. With a 1/8NPTF thread to screw into a matching thread on a T...
Low pressure switch that 'makes' when pressure falls below a chosen point. Adjustable within a range of 15 to 120psi - set to 35psi. With a 1/8NPTF thread to screw into a matching thread on a T...
With 1/8" NPTF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/4" NPTF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/8" BSPTmale thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/2" UNF male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
With 1/4" BSP male thread to screw into the oil gallery and the same female thread to take the original transmitter and a female 1/8" NPTF tapping to allow a pressure switch or a 1/8" BSP female...
Male/male adaptor - 1/8" BSP to 1/8" NPTF
Temperature gauge adaptor with a 5/8" UNF female connection and Dash 8 JIC hose end male connections to take types of capillary gauge (Caerbont, other UK, USA, Japan) for fitting into an oil hose...
Temperature gauge adaptor with Dash 10 JIC male end hose connections and a 5/8" UNF female connection to fit types of capillary gauge (Caerbont, other UK, USA, Japan) into an oil hose system. Oil...
Dash 8 (-8) hose connections.Temperature gauge adaptor to take types of capillary gauge (MOCAL, Racetech, Smiths competition) for fitting into an oil hose system. Oil hose adapters are two-part...
Dash 10 (-10) hose connections. Temperature gauge adaptor to take types of capillary gauge (MOCAL, Racetech, Smiths competition) for fitting into an oil hose system. Oil hose adapters are two part...
Brass Y fitting, used when fitting oil pressure gauge with an oil pressure switch, two 1/8" BSP female threads and one 1/8" BSP male thread, all parallel.
Temperature gauge adaptor to take types of capillary gauge (MOCAL, Racetech, Smiths competition) for fitting into a water hose system. Water hose adapters are machined from billet. Hose...