Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
A selection of popular ignition accessories including spark plug caps, washers, HT leads and terminals
This inline suppressor features a 7.6mm diameter socket at either end with a brass screw thread in the centre that screws into the core of standard 7mm diameter HT leads. The carbon suppressor...
Straight spark plug HT cap, black phenolic moulding with 5K OHM carbon suppressor, overall length 70mm. Will suit older vehicles. Threaded spur screws into the core of the HT/ignition cable....
Angled (120 degree) spark plug HT cap, black phenolic moulding with carbon 5k ohm suppressor. Supplied with grommets making it waterproof, or can be used without grommets to better suit older...
Angled (90 degree) spark plug HT cap, high quality black phenolic moulding with carbon 5k ohm suppressor. Supplied with grommets making it waterproof, or can be used without grommets to better...
Straight, non-suppressed, Hypalon spark plug cap, black, complete with terminal.
HTC straight spark plug terminal, as original early Champion version. These are a non-suppressed terminal with fixed screw tip that screws into the centre core of the HT wire ends. Applications...
Right angled, not suppressed, Hypalon spark plug cap complete with terminal
WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.
WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.
Split brass washer for distributor HT lead (each). 9.5mm diameter with 2mm hole.
Push fit distributor HT lead terminal, screws into the end of the HT lead, only suitable for copper core HT lead.
Crimp type straight spark plug terminal, pushes directly onto the spark plug, can be used with either 7mm copper core or carbon HT lead., overall dimensions25mm long x 8mm o/d.
Distributor cap angled terminal. Crimps onto the end of the HT cable and pushes into the top of the distributor cap. Push in type caps only.
Insulator cover for distributor cap or coil terminal - use with part numbers 006-03 or 921 depending on whether push in or acorn connection
Insulator cover for distributor cap terminal part number 006-13
HT lead that looks very similar to the original rubber covered lead, but it is covered with a soft matt plastic which will withstand oil/heat etc. better than the bright plastic type. Copper wire...
HT lead that looks very similar to the original rubber covered lead, but it is covered with a soft matt plastic which will withstand oil/heat etc. better than the bright plastic type. Copper wire...
HT lead that looks very similar to the original rubber covered lead, but it is covered with a soft matt plastic which will withstand oil/heat etc. better than the bright plastic type. Copper wire...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...
Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...