Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Reproduction frosted plastic lens for Lucas LD109 type side lamps. Will fit original lamps as well as our 918-R, 918-RB and 918-T part numbered reproduction lamps.
Replacement red lens for our 300ST Landrover stop & tail lamp, polycarbonate red domed lens 67mm in diameter x 37mm deep, held by two screws with 53mm centres.
Replacement clear lens for our 300LC & 300CA Landrover side lamp, polycarbonate clear domed lens 67mm in diameter x 37mm deep, held by two screws with 53mm centres.
Replacement red plastic lens for our 993 flush mounted lamps, 54mm diameter with 60mm diameter flange x 44mm deep.
Replacement clear plastic lens for our 993 flush mounted lamps, 54mm diameter with 60mm diameter flange x 44mm deep.
Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number 516173....
Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number 505975....
Original pattern frosted and ribbed lens with chrome on brass rim for our 1142S and 1142IND lamps, equivalent to the original Lucas 1142 type side lamp. Overall outside diameter 57mm, 18mm deep.
Flat, stippled pattern glass lens, very similar to the original Lucas 'Difusa' type glass used on early headlamps. Stippled pattern on one side as original. Equivalent to Lucas part number L215. 9...
Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 551308. 7 13/16" diameter. Suitable for Lucas type lamps L140, L148, LD147,...
Domed, pressed glass lens with 1/4" wide flutes in the lower half of the lens, below and around the clear centre and clear upper half. Equivalent to Lucas part number 504224. 7 3/4" diameter....
Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 507163 or 504525. 9 1/8" diameter. Suitable for Lucas type lamps L166, LD165,...
Domed, pressed glass 'U Flute' Lens with 5/8" wide flutes around central U pattern. Equivalent to Lucas part number 551093. 8 1/2" diameter. Suitable for Lucas type lamps L150, LBD150, MBD150 and...
Replacement glass lens for original Lucas ST52 type lamps as well as our reproduction lamps - part numbers ST52B and ST52C. Equivalent to original Lucas number 523255. Lamp applications include...
Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern. 4mm thick and 10 15/16" (277mm) in diameter, with locating notch in outer edge.
Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern. 4mm thick and 11 1/4" (285mm) in diameter, with locating notch in outer edge.
Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern around a CLEAR centre section. 4mm thick and 10 15/16" (277mm) in diameter, with locating notch in outer edge. Difusa pattern...
High quality plastic split RED/AMBER lens as used inour CA1149 part number lamps - split lens 'D' lamps (part numbers 249A and 428A), equivalent to the Lucas type ST51, converted to Stop, Tail,...
Glass P100 headlamp lens with a 'Difusa' type (frosted finish) pattern around a CLEAR centre section. 4mm thick and 11 1/4" (285mm) in diameter, with locating notch in outer edge. Difusa pattern...
Glass P100 DB headlamp lens with a 'Difusa' type (frosted finish) pattern around a CLEAR 'figure 8' shaped centre section. 4mm thick and 10 15/16" (277mm) in diameter, with locating notch in outer...
Amber glass lens for part number series 298 (equivalent to Lucas L488) type indicator lamps
Red glass lens for Lucas L488 type rear lamps
Clear glass lens for 298 part number series (equivalent to Lucas L488) type side lamps
Amber glass lens for 299 part number series (equivalent to Lucas L594) type indicator lamps.
Red glass lens for 299 part numbers eries lamps (equivalent to Lucas L594) type rear lamps
Clear glass lens for 299 part number series (equivalent to Lucas L594) type side lamps.
Original pattern opaque glass lens with chrome rim surround for our 297 (Lucas 1130) type side lamps, overall outside diameter 47mm. Fixed in position with retaining screw part number 865 - please...
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if required.
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
Amber lens kit for Lucas L691/2 indicator lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.
Red lens kit for Lucas L691/2 rear lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.
Clear lens kit for Lucas L691/2 type side lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.
Clear lens indicator conversion kit for Lucas type L794 lamps. Includes new clear lens, amber bulb and new bolts. Update the look of your Morgan with these high quality lenses. Supplied with a 12V...
Replacement large red plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Red glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lenses. 40mm diameter lens with a concave back to allow fitment of a standard BA15D...
Amber glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lens. 40mm diameter lens with a concave back to allow fitment of a standard 25mm...
Replacement clear plastic sleeve lens for the number plate illumination window in 288 part number series (equivalent to Lucas L582 type) lamps.
A high quality round backlight crystal glass lens with a very well defined faceted prismatic pattern. Manufactured in transparent deep red glass. 40mm in diameter x 8mm maximum thickness, with a...
High quality round backlight crystal glass with faceted prismatic pattern. Manufactured in transparent deep amber glass. 40mm in diameter x 8mm maximum thick. With a flat (rather than concave)...
Very high quality backlight crystal glass round faceted prismatic lens, manufactured in transparent deep red glass, 50mm in diameter x 8mm thick, with a flat back
Very high quality backlight crystal glass round faceted prismatic lens, manufactured in transparent deep amber glass, 50mm in diameter x 8mm thick, with a flat back
Very high quality heavy crystal glass round bulls eye lens, manufactured in transparent deep red glass, 80mm diameter with a flat back, total thickness 26mm. Smooth front and rear.
Very high quality backlight crystal glass oblong prismatic lens, manufactured in transparent deep red glass, 45mm x 20mm in diameter x 8.5mm thick in the centre, with a flat back.
Replacement amber lens for our 932 lamp, domed lens with cut out for retaining screw, 54mm diameter x 22mm deep
Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.
Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.
Domed red lens
Domed red or amber main lens for Rubbolite '25' model lamps (our part number series 257). Base - 60mm maximum diameter. Please select the colour you require.
Domed amber lens
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Amber spare lens
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Red spare lens
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber diver's type lamp equivalent to the Rubbolite 'Number 8' model - available in clear, red or amber plastic.
Clear spare lens
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.
Flat red lens
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber diver's lamps equivalent to the Rubbolite 'Number 8' model, please select the colour you require.
Flat amber lens
Replacement red glass lens for plain ST51 type 'D' lamps, overall dimensions 67 tall x 78mm wide.
Replacement red split glass lens for ST51 type 'D' lamps, our part numbers 249A and 428A
Replacement acrylic red lens (equivalent to Lucas part number 523307) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.
Replacement acrylic red and white lens (equivalent to Lucas part number 523308) for the Lucas 288-3 rear number plate lamp/light box assembly. Dimensions 95mm wide x 67mm tall.
Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
Conversion kit to modify your 776 part number or Lucas ST38/'Pork Pie' type rear lamps to also give amber turn indication. New WEDGE T10 bulbs and bulb holders, special red and amber lens. This...
Spare clear side lens for part number series 776 and CA1249 (equivalent to Lucas ST38) 'Pork Pie' type rear lamps.
Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.
Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.
Replacement glass lens for 211 part number series 'Duolamp' rear lamps. All RED or split AMBER/RED options available.
All glass red lens for 211 part number series 'Duolamp' type rear lamps. Embossed with 'STOP' script on top section.
Quality clear glass side lens for the number plate illumination cut out on 'Duolamp' type rear lamps - see part number series lamps CA1265, CA1266 and 211R.
High quality plain red glass lens for 958 and CA1265 part number series 'Duolamp' type lamps with a single (equal waisted) red lens.
High quality plain red glass lens for part number series CA1266 'Duolamp' type stop and tail rear lamps with a plain (unequal waisted) lens.
Chrome lamp rim, glass lens and retaining seal for L489 lamp
Polycarbonate replacement lens for 1253 rear fog light.
Red and amber lens for Lucas L840 type rear lamps as used on MGs and Austin Healeys
Moulded plastic lenses equivalent to Lucas type L792 clear front indicator / side light lenses. Used on all the Hillman Imp range and derivatives, also on rally prepared Ford Escort models. Sold...
Moulded plastic lenses equivalent to Lucas type L792 clear/amber front indicator / side light lenses. Used on all the Hillman Imp range and derivatives, also on rally prepared Ford Escort models....
Clear front indicator lens. For MG MGB Midget with rubber nose from 1975 onwards, and Jaguar XJS 1981-1991. Equivalent to Lucas part number L930 / L931
Replacement front glass lens for Raydyot pillar mounted spot lamp 570. measures 104mm diameter.
Original Lucas 'new old' stock plastic lens for L467 number plate lamps. 'E' and 'LUCAS 4103' marked.
Original glass Lucas lens for L467. Lucas part number 572596. Marked - 467/2 LUCAS Made in England
Clear side lens for number plate window for Lucas type ST51 type 'D' Lamps - our part numbers 249, 249A, 428, 428A, CA1149B and CA1149C