Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Return spring for dipping reflectors used on Lucas lamps including the L150. Extension spring. 48mm long, 6.25mm diameter with one closed loop end and one open loop end. Please check dimensions...
Dipping reflector pivot used on Lucas two piece dipping reflectors. Spring steel 'P' clip and ball bearing holds inner refector bowl and outer reflector rim togther, allowing the inner reflector...
Replacement bulb holder divider plate for 767/ST51/'D' type rear lamps. Accepts 2 x BA15S bulbs - one 5W for rear/tail and number plate light, one 21W for stop/brake light. Made to the original...
Two piece spun brass assembly, to replace damaged BA15 bulb holder sockets on vintage lamp reflectors. Remove old damaged bulb holder socket and then press fit new assembly together either side of...
Hiqh quality clamp for tightening the bulb holder socket in the back of Lucas lamp refectors onto BA15 bulb holders (e.g. our part numbers 853 or 153). The clip strap is formed from steel and...
Reproduction frosted plastic lens for Lucas LD109 type side lamps. Will fit original lamps as well as our 918-R, 918-RB and 918-T part numbered reproduction lamps.
Amber glass lens for part number series 298 (equivalent to Lucas L488) type indicator lamps
Red glass lens for Lucas L488 type rear lamps
Clear glass lens for 298 part number series (equivalent to Lucas L488) type side lamps
Amber glass lens for 299 part number series (equivalent to Lucas L594) type indicator lamps.
Red glass lens for 299 part numbers eries lamps (equivalent to Lucas L594) type rear lamps
Clear glass lens for 299 part number series (equivalent to Lucas L594) type side lamps.
Single contact bulb holder for Lucas L488 lamps
Twin contact bulb holder BAY15D (offset pins) for Lucas L488 lamps
Bulb holder BA15S single contact for Lucas L594 lamps
Twin contact BAY15D bulb holder (offset pins) for Lucas L594 lamps. For stop and tail or front clear side and indicator.
Rubber rear body (boot) for Lucas L488 model type lamps. Ford part reference E0A-13216.
Rubber rear body (boot) for Lucas L594 model type lamps.
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if required.
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
Plastic front lens for our 297 (Lucas 1130) type sidelamps. Purchase with O-ring seal part number 361A. Fixed in position with retaining screw part number 865 - please order seperately if...
Original pattern opaque glass lens with chrome rim surround for our 297 (Lucas 1130) type side lamps, overall outside diameter 47mm. Fixed in position with retaining screw part number 865 - please...
Rubber lens 'O' ring seal for Lucas 1130 type sidelamps (297 series lamps) fitted with the plastic lens (part number 361).
Rubber lens 'O' ring seal for Lucas type 1130 (297 series) sidelamps, with the glass lens with chrome surround and rim (part number 681).
Double contact bulb holder for Lucas 1130 type side lamp, accepts double contact SBC BA15D parallel pin bulbs. Please note these are made to original pattern. These bulb holders allow conversion...
1130 lamp bulb holder. BAY15D base for double contact, offset pin bulbs - B380 for 12V and B384 for 6V 21/5w
1130 lamp bulb holder. BA15S base for single contact, equal pin bulbs - B382 for 12v and B317 for 6V 5W
Flat, rubber mounting pad for 297 (Lucas 1130) type sidelamps.
Top rim stainless steel retaining screw for 297 (Lucas 1130 type) sidelamp lenses - use to retain lens part numbers 681 (glass with chrome surround) and 361C/361A (clear or amber moulded plastic).
Replacement red glass lens for plain ST51 type 'D' lamps, overall dimensions 67 tall x 78mm wide.
Replacement red split glass lens for ST51 type 'D' lamps, our part numbers 249A and 428A
Clear side lens for number plate window for Lucas type ST51 type 'D' Lamps - our part numbers 249, 249A, 428, 428A, CA1149B and CA1149C
Lens retaining wire for 249/428 part number series (equivalent to Lucas type ST51 type) 'D' lamps
Body to base gasket for Lucas type ST51 'D' Lamps - our part number series, 428, 249 and CA1149
Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
Spare red glass lens 82mm diameter for original Lucas type ST38/'Pork Pie' rear lamps, or our 776 part numbered reproductions. The round lenses feature a cut out for the rim fixing screw....
Spare clear side lens for part number series 776 and CA1249 (equivalent to Lucas ST38) 'Pork Pie' type rear lamps.
Replacement bulb holder divider plate for 776/ST38/'Pork Pie' type rear lamps. Accepts 3 x BA15S bulbs. Made to the original specification.
Chrome on brass fixing nut for original Lucas ST38 'Pork Pie' type lamps with 4BA thread.
Chrome on brass fixing nut for reproduction 776/CA1249 part number series lamps (reproduction Lucas ST38/'Pork Pie' type lamps) with M4 fixing stud thread.
Rubber lamp entry cable grommet. Approximately 13.5mm internal diameter.
Amber lens kit for Lucas L691/2 indicator lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.
Red lens kit for Lucas L691/2 rear lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.
Clear lens kit for Lucas L691/2 type side lamps. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Lens, screws, brass blocks and gasket.
L691 screw kit. 2 cross head screws and 2 ferrules
Base rubber for L691 Lucas type lamps. Fits between the lamp base and the wing. Lucas part number 54572755
Replacement large red plastic lens with brass inner threaded insert for our 288 part number series lamps, equivalent to the original Lucas 582 lamp.
Red glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lenses. 40mm diameter lens with a concave back to allow fitment of a standard BA15D...
Amber glass round prismatic lens for 288A lamps - early Lucas type L582 lamps with the metal rim and prismatic lens. 40mm diameter lens with a concave back to allow fitment of a standard 25mm...
Replacement clear plastic sleeve lens for the number plate illumination window in 288 part number series (equivalent to Lucas L582 type) lamps.
Orange plastic semaphore arm lens to fit the Lucas SF80 trafficator, part of the SE100 trafficator assembly. Equivalent to Lucas part number 532026. Overall length 180mm.
Polished stainless steel backing cover for Lucas SF80 SE100 trafficator. overall length 195mm.
Black powder coated steel cover for Lucas type L467 number plate lamps. 100mm long, 47mm deep and 36mm high.
Black plastic cover for Lucas type L467 number plate lamps. 100mm long, 47mm deep and 36mm high.
Chrome cover for Lucas type L467 number plate lamps. 100mm long, 47mm deep and 36mm high.
Carbon fibre errect cover for Lucas type L467 number plate lamps. 100mm long, 47mm deep and 36mm high. NOTE - Requires 13mm diameter hole in top of lamp lens, to accept plastic inner mounting...
Original Lucas 'new old' stock plastic lens for L467 number plate lamps. 'E' and 'LUCAS 4103' marked.
Original glass Lucas lens for L467. Lucas part number 572596. Marked - 467/2 LUCAS Made in England
Headlamp mounting bolt - hollow. Thread 5/8" x 26 tpi (fine thread) as the original item. measures approx 56mm long x 16mm thread diameter.
Headlamp mounting bolt - hollow, with loose collar. Thread 5/8" x 26 tpi (fine thread) as original item. Measures approx 50mm long x 16mm thread diameter.
Headlamp mounting bolt and nut for Lucas P100 type lamps. Thread 1/2" x 26 tpi (fine thread) as original item. Measures approx 105mm long x 13mm thread diameter (thread runs for 28mm), head...
Lamp mounting bolt - hollow. Thread 7/16" x 26 tpi (fine thread) as original. Measures approx 36mm long x 11mm thread diameter. Supplied with hexagon nut. Used on various Lucas spot and sidelamps.
Hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). Approx 16mm bore. 10mm deep. 13/16" AF.
Hexagonal nut for many Lucas type sidelamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore.
Brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc. type lamps. Thread 1/2" x 26 tpi. Equivalent to Lucas part number 500357
High quality stem bolt cup for headlamp mounting. Companion part to STEMBOLTKIT but compatible with many other headlamp stem bolts. Chrome finish of machined part. Good weight and finish. 38mm max...
High quality stem bolt cup for headlamp mounting. Companion part to STEMBOLT kit but ompatible with many other headlamp stem bolts. Black half gloss powder coated finish of machined part. Good...
Silver painted bronze bracket for some Lucas type headlamps. Fits inside headlamp shell, the tongue fits through rim slot which then accepts a rim fixing screw through a plain 5mm diameter hole,...
Chrome plated bronze bracket for Lucas type headlamps such as the L140. Fits through a slot in the headlamp rim, and the base of the daisy headed rim fixing screw (part number 641) locates in the...
Chome plated bronze bracket for Lucas type headlamps such as the L140. Fits inside the headlamp shell rim - the tongue fits through the slot which then accepts the rim fixing screw 641 in a 2BA...
Chrome on bronze rim catch for Lucas head lamps, long type, overall dimensions 45mm long x 26mm wide. Makes Lucas assembly part no. 532590 with compression spring - part number 864A - and a small...
Chromium plated rim catch, for Lucas type head lamps, short style, overall dimensions 31mm long x 27mm wide, equivalent to original Lucas part number 509936. Use with 'spectacle' wire spring clip...
Spring (spectacle shape) for rims that use short rim catch clip (our 863B), equivaent to Lucas part number 509191
Headlamp EPDM rim seal for many Lucas lamps including the L140, L148, L150 and L165 and L166. The flap locates in the 3mm wide groove in the bowl rim, behind where the reflector (bead type, rather...
Headlamp bowl to body rubber gasket for all two screw adjuster 7" (700 type) lamps. Equivalent to Lucas part number 54521487.
Headlamp glass to rim rubber dust gasket for 7" Lucas 700 series type lamps. Equivalent to Lucas part number 552906.
We have designed this backing plate to reduce light loss into the boot of a Cobra, therefore increasing the light output of L542 type lamps.
Replacement cover for the Lucas Square 8 fog or driving light.