Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Small, flexible/shockproof rubber bodied rear lamp equivalent to the old Rubbolite No.5 model for vintage motorcycles or as an auxiliary rear lamp for small cars. The rubber body is fitted with a...
Vintage 'Toby' rear lamp equivalent to Lucas part number ST52 (alternative Lucas part number 523648). These high quality reproduction lamps are made from steel body with a red glass lens....
Vintage 'Toby' rear lamp equivalent to Lucas part number ST52 (alternative Lucas part number 523648). These high quality reproduction lamps are made from steel body with a red glass lens....
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
Chrome split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function, fitted...
Black split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. fitted with...
'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type lamp. Fitted with double contact bulbholder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing base...
Early pattern reproduction 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide...
Reproduction 'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type. Fitted with double contact bulb holder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing...
Early pattern 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall....
Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a...
Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a...
Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a...
Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a...
Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a...
Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby chrome ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR Number Plate...
Toby black ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR & Number Plate...
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red and amber split glass lens. 12V bulbs included as standard. Vintage style cloth...
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red and amber split glass lens. 12V bulbs included as standard. With number plate...
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red split glass lens. 12V bulbs included as standard. Vintage style cloth braided green...
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red split glass lens. 12V bulbs included as standard. With number plate illuminator...
Gloss black powder-coated steel housing and rim. High-quality all red split glass ribbed lens. Vintage style cloth braided green and black nylon coated wires. Uses two BA15S bulbs - B317 (6v) stop...
Gloss black powder coated steel housing and rim. Includes number plate light mounted at the bottom of the housing. High quality red, ribbed split glass lens. Vintage style cloth braided green and...
Gloss black powder coated steel housing and rim. High quality split glass lens with 'STOP' script in upper section. Vintage style cloth braided green and black nylon coated wires. Uses two BA15S...
Ford Model "A" type, all polished stainless steel body and rim, rear stop and tail light with "STOP" script in amber in the red/red glass lens. Approx. 97mm diameter x 51mm deep. Uses two...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for...
Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for...
Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for...
Round rear stop and tail lamp with single flat "reflective" red glass lens. Polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm...
Round rear stop and tail lamp with single flat "reflective" red glass lens. With number plate Illumination with glass lens on bottom side of tail light housing. Highly polished stainless steel...
Tail lamp assembly with gloss black housing and highly polished stainless steel rim. High quality, all red glass 'reflective' lens with clear side lens for number plate illumination. Uses a BAY15D...
A neat rear lamp equivalent to the Rubbolite No. 25 lamp, with a single mounting point. Can also be supplied with a flat red lens (instead of the domed red lens fitted as standard) to give a lamp...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Round ruber lamp equivalent to the Rubbolite number 23 rear lamp - 91mm diameter at widest, with raised red lens and side number plate illumination lens. Fitted with two double contact bulb...
Rubber body with formed metal mounting bracket with two mounting holes. Ideal for hiding/unobtrusive mounting on older cars. With red lens for a stop and tail light fuction. 48mm Diameter. Uses a...
Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x...
Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x...
Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x...
Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
Toby 'diver's helmet' rear lamp. With three 52mm diameter glass, bulls eye lenses. Overall lamp diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs.
Fitted with...
Toby 'diver's helmet' small tail lamp. 48mm diameter mains glass bulls eye lens, 42mm diameter glass bulls eye side lenses. Overall lamp diameter about 80mm. Similar to the old CAV, Rotax and...
Pair of nickel plated, cast brass rear lamp brackets suitable for diver's helmet rear lamps and similar, requiring spade mounting. Oval mounting base, drilled with 8mm diameter holes at 45mm...
A super reproduction of the "Owl Eye" rear lamp from Toby - originally for 'stop', tail and reversing function. A quality recreation of the original Lucas type 312B lamp. Chrome plated finish on...
Angle mounted stop and tail rear lamp equivalent to Lucas L471 type (alternative part number 53200). Glass lens approx 57mm deep, chrome bezel. Base approx 127mm x 62mm. Uses a BAY15D bulb. For...
Rear stop and tail lamp equivalent to the L549 type for mounting on to sloping rear wing panel. Red plastic lens. Chrome base plate with flat back rubber mounting pad. Base 85mm x 142mm. Uses a...
Stop and tail lamp as fitted to Triumph Spitfire Mk I, II and III and GT6 and some Morgan's. Equivalent to Lucas part number L672. Alternative part number 54884. Uses a BAY15D bulb. For bulbs...
A useful rear lamp and good reproduction of the Lucas MT110 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
A useful rear lamp and good reproduction of the Lucas MT211 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
A useful rear lamp and good reproduction of the Lucas 477/1 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The large red lens...
Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L564 type. Fitted to many classic motorcycles from BSA, Triumph, Norton in the period c1955-70. Stainless steel base with...
Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L525 type. Fitted to Triumph TR2 and TR3 as well as many motorcycles. Chrome plated steel base with polycarbonate red and...
Rear lamp equivalent to the Lucas 529 type. Stop, tail and number plate illumination. Fitted to many motorcycles. Steel base with rubber mounting pad, two piece high quality polycarbonate red...
Recessed stop and tail lamp with rubber boot and body (approx 74mm diameter), chrome rim and red glass lens. 25mm depth from mount panel. As Lucas model L488 with flat lens. Alternative part...
Recessed lamp (approx 72mm diameter) with rubber boot and body, chrome rim and red glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Alternative part number 53564. Panel...
Land Rover stop & tail lamp 73mm outer diameter. Uses a BAY15D bulb, for spare bulbs please see B380 (12v). LED upgrade lamps and kits are available for these types of lamp - please see...
Land Rover LED RED lens stop and tail light, same size as the original Land Rover lights - 73 mm diameter.
Multi input voltage 9-33V.
E Marked. SAE Approved.
Waterproof to IP67.
Quality...
Rear stop and tail lamp equivalent to Lucas lamp L539. Alternative part number 53624. Diameter 83 mm. Applications include - Austin, Bentley, Bristol, MG, Riley, Rolls Royce, Rover and...
Stop and tail lamp with double contact bulb holder equivalent to Lucas type L691/2. Alternative part number 54296. Rim diameter 83 mm. "E" Marked. Applications include Austin Healey, Hillman Imp,...
Land Rover LED CLEAR lens stop and tail that lights up Red, same size as the original Land Rover lights - 73 mm diameter.
Multi input voltage 9-33V.
E Marked. SAE Approved.
Waterproof to...
Superb reproduction stop and tail lamp and reflector, as fitted to AC Cobra and Ace, Jensen 541 and Hillman Minx. Chrome on brass rim. 66mm wide and 124mm long. Equivalent to Lucas Part number...
Good high quality reproduction Left Hand (near-side) rear lamp, equivalent to the Lucas L647 lamp. Three function lamp - indicator, stop and tail and reflector. Three stud fixing on the back,...
Good high quality reproduction Right Hand (off-side) rear lamp, equivalent to the Lucas L647 type lamp. Three function lamp - indicator, stop and tail and reflector. Three stud fixing on the back,...
Good high quality reproduction L/H (near-side) rear lamp, suitable equivalent of the Lucas L940. Four function lamp - indicator, stop and tail, reverse and reflector. Four stud fixing on the back,...
Good high quality reproduction R/H (off-side) rear lamp, suitable equivalent of the Lucas L940. Four function lamp - indicator, stop and tail, reverse and reflector. Four stud fixing on the back,...
95mm LED with Stop & Tail functions. Red Reflector. E Approved. Works with 12v and 24v.
95mm LED Brake & Tail. Clear reflector red LED's. E Approved, Works with 12v & 24v.
LED teardrop 1938-39 Ford Stop and Tail Light, originally for 1930s Ford. 28 Super Bright Red LEDs behind glass Lens, epoxy coated, fully sealed electronics. Includes stainless steel rim and black...
A small LED stop and tail light that is fully E marked so the light output is very bright. This light would work well on a wide range of cars with the advantage of being LED so taking a very small...