Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Formed, steel (1mm thick) bracket for our 414 part number mechanical clockwork flasher unit. Gloss black powder coat. For under dash mounting. 8mm diameter mounting hole in top flange, 10mm hole...
Remanufactured part equivalent to Lucas 31190D, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in brown bakelite. Black, flat oval base mount (40mm...
Remanufactured part equivalent to Lucas 31476, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in ivory bakelite. Black, flat oval base mount (40mm high...
Remanufactured part equivalent to Lucas 31311, SPB120 panel mount indicator switch. Domed raised switch body assembly with moulded lever in black bakelite. Black, flat oval base mount (40mm high x...
Repair kit for black SPB 120 switches - black Bakelite switch base with brass terminal connections, three piece brass sprung roller contact assembly, black Bakelite screw down bezel with red lens...
Reproduction part equivalent to Lucas TS82 panel and column mounted rotary 3-way indicator/Trafficator switch. Alternative Lucas number 31611 (also 31379 is the same switch body just with a longer...
Black coated steel base plate 40mm in diameter with 23mm internal diameter. Two vertical locating tabs with threaded holes for locating the mounting plate into the body of the Lucas S58 column...
Black coated steel base plate 40mm in diameter with 23mm internal diameter. Four M3 threaded holes - two for attaching the TS82 switch to the plate and two for fitting the plate to a surface with...
White surface mounting trafficator indicator switch with integral flasher unit. New old stock by Starlite, with three terminals marked IG, R and L. Requires separate warning light, supplied with...
Panel mount indicator switch, suitable for any application. Requires 25mm hole through metal panel. Overall diameter 37.5mm at rear.
Panel mounted indicator switch, suitable for any application. Requires 25mm hole through metal panel. Overall diameter 37.5mm at rear.
Panel mounted indicator switch, with knob which illuminates in use, 12 volt application only. Requires 25mm hole through metal panel for mounting.
Clockwork panel mounted flasher unit/indicator switch (suitable for 6, 12 or 24 volt systems), makes and breaks contacts for approximately 20-25 seconds then self cancels. Body size approximately...
Steering column mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back), black bakelite type finish with plated stalk....
Steering column mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back), black bakelite type finish with plated stalk,...
Steering column mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back). Ivory bakelite type finish with plated stalk....
Illuminated steering column-mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back). Ivory bakelite type finish with...
Illuminated indicator switch. Small Illuminated switch - ON/OFF/ON. Approx. 16.5mm mounting hole required.
These come fitted with a 12v bulb, however these can be change to suit the...
Heavy duty metal toggle switch. ON/OFF/ON (indicator function). 25amp rating. Approx. 12.5mm hole required.
Metal toggle indicator switch ON/OFF/ON. Aluminium machined end. Approx. 12.5mm panel hole required.
Toggle Switch On/Off/On (Indicator function). Equivalent to Lucas part number 31743. 6.3mm Lucar/blade terminals. 10 amp rating at 12V DC. Approx. 14.5mm panel hole required. Maximum panel...
Indicator switch which mounts to steering column, secured with a band clip that can be removed without leaving any extra holes etc. Body approx 56mm tall x 44mm deep, overall length approx 164mm....
Indicator switch equivalent to Lucas SQB118 column indicator switch for AC, Triumph Morgan. Controls indicators, and lights - without push for horn. Applications include: MGB GT 1971-76, MG Midget...
Indicator switch equivalent to Lucas SQB119 for AC, Triumph and Morgan. Controls indicators, lights and horn. Applications include: AC 3000 ME 1979-85, MORGAN - Four Four 1600 1982-85, Four Four...
Self cancelling indicator switch. Applications include Triumph Herald, Vitesse Mk1 & Mk2, Spitfire Mk1, Mk2, Mk3 Mk4 & 1500 1962 - 1981, GT Mk1, Mk2 & Mk3 1966 to 1973, Triumph TR4,...
Column mounted self cancelling indicator switch with light flash function. Applications include MGB 1962 to 70, MBG GT 1965 to 70, MGC 1967 to 70, Midget 1962 to 69, Sprite MkII, II and IV 1962 to...
Column mounted, self cancelling indicator switch with horn and light flash functions. Applications include Triumph Stag MkII right hand drive. Models from LD20001