Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet...
Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
Slot type wiper blade for flat screens. Stainless steel back. Use rubber peg 372 or 372A to secure these blades on to slot fitting wiper arms. Available in the following lengths - 200mm (8"),...
Slot type wiper blade for flat screens. Stainless steel back. Use rubber peg 372 or 372A to secure these blades on to slot fitting wiper arms. Available in the following lengths - 200mm (8"),...
Rubber peg to secure slot type wiper blades to wiper arms.
Rubber 'duck's foot' peg with triangular flap, to secure slot type wiper blades.
Adaptor to enable the fitting of a spline shaft wiper arm on to a shaft. Secures with a pinch bolt. Dimensions 20mm tall with a 19mm diameter base, central bore 6mm (7/32"), 13.6mm spline.